Built-In Designs - Janome Sewing Machine Getting Started Manual

1
18 min 6 Colors
7,013 ST 70x79mm
600 spm
Emerald Green 250
1
3
2
1
18 min 6 Colors
7,013 ST 70x79mm
600 spm
Emerald Green 250
01 : Emerald Green 250
02 : Powder Blue 229
03 : Coral 234
04 : Mustard 270
05 : Honey Dew 273
06 : Sunflower 239
START
STOP
2
3
4
5
1
Ready to Sew
2 Auto
1
17 min 6 Colors
7,013 ST 70x79mm
600 spm
2/6
Powder Blue 229
X
Jog / ST

Built-in Designs

Press the Built-in Design Tab.
Press the pattern selection key to select the desired
pattern.
The embroidery screen will appear.
Adjust the hoop position with the jog keys so that the
needle drop position comes right above the center of
the reference lines on the fabric.
1 Jog keys
2 Needle drop position
3 Centerlines
1 Exit key
Press this key to return to the pattern selection window.
2 Stitch preview key
Press this key to show the stitched image of the
selected design
3 Color/section key
Press this key to show the complete image of the
selected design or partial image of each color sections.
To view the next color section, press the next page
key. Press the previous page key
previous color section.
The machine will automatically stop sewing (and trim
the threads if the auto thread cutting is activated) when
one part of the embroidery design is finished.
Change the thread and start sewing again.
Sewing the specific color/section by skipping
You can sew only the specific color sections of the
design by pressing the next page key
desired section is displayed.
4 Color list key
Press this key to display a list of thread colors employed
in the selected design.
5 Hoop standby/exit key
Press this key to open a menu of choice for moving the
hoop. Press the key to move the carriage back to
the home position and turn to the ordinary sewing
mode, or press one of the
carriage to a standby position.
71
to view the
until the
keys to move the