Preparing An Sd Memory Card - Roland CD-2u Owner's Manual

Preparing an SD Memory Card

Here's how to prepare an SD memory card for recording.
* The CD-2u and the SD-2u support SDHC cards (up to 16 GB).
* Some SD memory card types or SD memory cards from some manufacturers may not record or
Inserting an SD Memory Card
1
26
play back properly on this unit.
Insert the SD memory card into the SD card slot on the CD-2u/SD-2u's
front panel.
Printed surface
upward
SD card slot
Displayed screen
Audio source
Total number Total playback time
of tracks
The SD memory card write protect feature (LOCK)
fig.SDlock.eps
The contents of the SD memory card can be protected by
write protecting it. To write protect a card, slide the write
protect switch on the side of the SD memory card to the
"LOCK" position.
Unlock write protect to record, edit, or delete data on the
card.
fig.SDcard01-e.eps
With the printed surface of the SD memory card
facing upward, insert the card until it clicks into
position.
* Carefully insert the SD cards or SDHC cards all the
way in-until it is firmly in place.
fig.SDcard02.eps
Status of the SD memory card
Nothing has been recorded yet.
A song has been recorded.
* If the SD memory card has already been recorded, the
total number of songs and the total playback time will
be displayed when the SD memory card information is
loaded.
This SD memory card cannot be used by the CD-2u/
SD-2u in its current state.
* If this message is shown, you'll need to format the card
before using it with the CD-2u/SD-2u. For details, refer
to the section on the following page entitled "If the
screen indicates "Unknown Format"" (Page 27).
Protect switch