Deleting An Unwanted Region At The End Of The Song (Trim Out) - Roland CD-2u Owner's Manual

Deleting Songs from an SD Memory Card
Deleting an Unwanted Region at the End of the Song
(Trim Out)
1
2
3
4
5
6
90
(continued)
If you stop recording slightly after the end of the performance so as to avoid missing
anything, there will be some unwanted silence at the end of the song. You can delete
this unwanted silence so that the song contains only the performance itself.
Insert the SD memory card that you want to edit, and press the
[SD CARD] button
SD becomes the audio source.
Use the [ ] or [
Press the [MENU] button to access the menu screen, and choose "Trim
Out?"
Press the [ ] (Play) button to play back the selected song.
fig.menu-trimout02-e.eps
Number of the track you're editing
When you come to the point that you want to be the end of the song (the
End Point), press the [
(If the song is long, you can fast-forward until you're near the desired End Point.)
Four seconds of sound following the End Point will play repeatedly.
Use the [+] or [-] button to precisely adjust the End Point.
Adjust the End Point so that you no longer hear the end of the song.
Button Explanation
[+] button Moves the End Point forward.
[-] button Moves the End Point backward.
.
] button to select the track you want to edit.
fig.menu-trimout01-e.eps
Press the [MENU] button to access the menu screen.
Use the [ ] [
Press the [ENTER] button to confirm your choice.
] (Record) button.
Plays repeatedly
Four seconds
Deleted region
End Point
—this will be the end of the song after editing.
] buttons to choose "Trim Out?"