If you are using another set of earphones other than the supplied
Jabra model, please note that differences in impedance and
sensitivity might limit or increase the maximum volume output
level . an impedance level of 16 ohm is recommended for the best
performance. However, always use extra precaution when using
another set of earphones than the original Jabra model .
WhAT ThE LighTS MEAN
The Jabra logo is an indicator light showing the headset status .
blue indicates that the unit is operating . Purple indicates you are
listening to music . Green signals that your headset is fully charged,
yellow 70% charged and red signals that your power is low .
What you see
Solid light:
Slow single flash:
Slow double flash:
Slow triple flash:
Quick double flash:
Triple flash:
5 quick flashes:
* STrEET2 is equipped with Jabra Discreet Light feature, meaning
that light indicator (LED) turns off after 1 min of non-activity.
headset is still active, and light will flash again after a tap on the
answer/end button or any call activity.
Jabra STrEET2 bluETooTh hEadSET
What it means
In pairing mode – see Pairing
section
connected to phone and in
standby mode
connected to phone and
active on call*
not connected to phone and
standby mode*
Incoming/Outgoing call
headset on but not connected
to phone*
Pairing succeeded*
10