Pairing Your Headset With Your Phone - Jabra STREET2 User Manual

Please note that the lEd indicator light turns off after 1 minute
to save battery. To check if the headset is on, tap the answer/end
button once – the lEd indicator light will flash, if the headset is on .

PAiRiNg yoUR hEAdSET WiTh yoUR PhoNE

headsets are connected to phones using a procedure called
'pairing' . by following a few simple steps, a phone can easily be
paired with a headset .
1. Put the headset in pairing mode
When you turn on your Jabra STrEET2 for the first time, the
headset will automatically start up in pairing mode – i .e . it is
discoverable for your phone . When the headset is in pairing mode
the lEd is constantly lit with a blue light .
2. Set your Bluetooth phone to 'discover' the Jabra STREET2
follow your phone's instruction guide . first make sure that
bluetooth is activated on your mobile phone . Then set your phone
to discover the headset . This usually involves going to a 'setup, '
'connect' or 'bluetooth' menu on your phone and selecting the
option to 'discover' or 'add' a Bluetooth device.* (See example from
a typical mobile phone in fig. 1).
3. Your phone will find the Jabra STREET2
Your phone will find the headset under the name STrEET2 . your
phone then asks if you want to pair with the headset . accept by
pressing 'Yes' or 'OK' on the phone and confirm with the passkey
or PIN = 0000 (4 zeros). Your phone will confirm when pairing is
complete .
fig . 1
Connectivity
MobilSurf
Bluetooth
Infrared port
WAP options
Synchronization
Networks
Select Info
Jabra STrEET2 bluETooTh hEadSET
Devices found
JABRA STREET2
Select
JABRA STREET2
Passkey:
Ok
Handsfree
JABRA STREET2
Added. The
handsfree is now
ready for use
Ok
6