Introduction; Punch Amplifier Accessory Pack - Rockford Fosgate PUNCH 100.2 Operation & Installation

I
N T R O D U C T I O N
Rockford engineers designed the Punch 100.2 and Punch 120.2 amplifiers
to withstand the rugged automotive environment while delivering superior
sound quality in a flexible, reliable, and efficient package. TRANS•ANA is a
low voltage circuit in the preamp stage of all Punch .
music sound crystal clear and very real, even when played at high volume
levels. This is matched with TOPAZ, a unique grounding circuit used to
eliminate noise problems associated with car audio systems and their
installation. Flexibility is accomplished with the use of a built-in crossover.
The use of a protection circuit called NOMAD, along with MOSFET and DSM
(Discrete Surface Mount) technologies improve amplifier efficiency. The
result of these components give the Punch amplifier awesome sound quality
in a "Bullet Proof" package. An explanation of these technologies, most of
which are exclusively designed and patented by Rockford, are described in
the Technical Design Features.
P A
UNCH MPLIFIER
The accessory pack shipped with the Punch mono amplifiers includes the
mounting hardware necessary to secure the amp to the vehicle and to attach
the end caps to the amplifier.
Installation & Operation Manual
Punch Verification Certificate
(4) Amplifier mounting screws (#8 x 3/4" Phillips)
(1) ATC Inline Fuseholder
(1) ATC 15 Amp Fuse (Punch 100.2)
(1) ATC 20 Amp Fuse (Punch 120.2)
A
CCESSORY
– 1 –
amplifiers that lets the
1
P
ACK