Biis Operation; Default Setting; Receiving A Call - Icom IC-F34GT Instruction Manual

4

BIIS OPERATION

Default setting

■
The following functions are assigned to each programmable
key as the default. However, the assigned function can be
changed by your dealer. Ask your dealer for details.
NOTE: [TX Code Enter] must be assigned to any key.
[P0]; Call
[P1]; Digital
[P3]; TX Code Enter
[UP]/[DOWN]; CH Up/Down
[MONITOR]; Moni(Audi): Push this key after the communica-
[P2]/[RED]; Null
16
: Push to transmit a 5-tone/BIIS call
when the selected channel is a
5-tone or MSK channel, respec-
tively.
: Push to select the call list ID/trans-
mit message, or to display the
receive message record for selec-
tion.
: Push to enter the direct ID code
edit mode for both 5-tone and
MSK.
: While in the standby condition,
selects the operating channel.
After pushing [Digital] or [TX Code
CH Select], selects call list or TX
code channel, respectively.
tion to send a 'Clear down' signal
during MSK channel operation.
: No function is assigned.

Receiving a call

■
D Individual call
q When an individual call is received;
• Beeps sound.
• " " appears and the mute is released.
• The programmed text message (e.g."
ing station ID (or text) is displayed alternately, depending on the
setting.
• " " appears or blinks depending on the setting.
Appears
w Push and hold [PTT], then speak into the microphone at
a normal voice level.
• " " indicator appears.
e Release [PTT] to return to receive.
• " " appears while receiving a signal.
r To finish the conversation, push [MONITOR] (Moni(Audi))
to send the 'Clear down' signal.
• Either station can send a 'Clear down' signal.
• " " is displayed for 2 sec. (approx.).
• " " disappears and the transceiver returns to the standby con-
dition.
") and the call-
Appears or blinks