Rockford Fosgate PUNCH 160.4 trans ana Operation & Installation page 26

4-Channel Stereo/Single Bridged Operation
+
+
2 ohm
2-Channel Input
Rear XCard*
FULL
Rear XCard
*Note: XCard can be inserted in HP, LP, or Full Range
• RCAs are connected to front or front and rear inputs
• Signal Input Switch is set to 2-channel or 4-channel input
• Gain for front and rear operates independently
• Impedance for front and rear stereo channel should be no less than 2
• Impedance for rear bridged channel should be no less than 4
• Front XCard is set for High-Pass, Low-Pass or Full Range
• Rear XCard is set to Full Range
• Passive crossovers are needed for proper stereo/mono operation
I N P U T
2-Ch.
R
L
L – + R –
Bridged Mono
Front
Front Speakers
–
+ –
2 ohm
Front XCard*
HP
Front XCard
4-Ch.
R
L
– L +
Bridged Mono
Rear
Rear Speakers
– +
2 ohm
–
4 ohm
4-Channel Input
Rear XCard*
FULL
Rear XCard
*Note: XCard can be inserted in HP, LP, or Full Range
– 22 –
– R +
– +
2 ohm
+
Front XCard*
HP
Front XCard
I
® ®
N
S
T
A
L
L
A
T
I
O
N