Making Booklets
Adjusting the cutting margin
2
Covers
Selecting Cover Feeder Mode
26
Select Trim and press the [Change] button. Select
Trim length and press the [OK] button. Press the [+]
or [-] buttons to fine adjust in increments of 0.5 mm or
0.02 inches. The trimmed booklet size and waste are
displayed. Press the [OK] button to confirm.
From the Ready screen, select Cover and press the
[Change] button.
Select On if you want the cover feeder to automatically
feed one cover to each set from the copier, or if you
are manually feeding a set.
Select Off if no covers are to be fed.
Select Feed if you want to fold only one sheet in
sequence.
Press the [OK] button to confirm.