HP T6553 D45 Reference Manual page 86

FUP Commands

To explicitly override a configured option:
-CONFIGURE DUP PURGE, SAVEID
-DUP A, B, SOURCEDATE
The SOURCEDATE option in the DUP[LICATE] command overrides the configured
SAVEID option.

To display and reset CONFIGURE options:
-RESET CONFIGURE DUP
-SHOW CONFIGURE DUP
-CONFIGURE DUP PURGE, SAVEID
-SHOW CONFIGURE DUP
DUP PURGE, SAVEID
The first command (RESET CONFIGURE DUP) resets the CONFIGURE
DUP[LICATE] options, and the second command (SHOW COFIGURE DUP)
displays the options. (There are none.) The third command sets the new
CONFIGURE options (CONFIGURE DUP PURGE, SAVEID), and the fourth
command (SHOW CONFIGURE DUP) displays them (DUP PURGE, SAVEID).

To use the CONFIGURE options from the previous example to demonstrate the
ECHO CONFIGURE option:
-CONFIGURE ECHO CONFIGURE
-DUP A, B, SAVEALL
CONFIG:
FILES DUPLICATED:
The CONFIGURE options that FUP reads (PURGE and SAVEID) are displayed. In
this example, the SAVEALL option overrides the SAVEID option.

To use and reset CONFIGURE options that do not have named defaults:
-CONFIGURE COPY UNSTRUCTURED
-COPY PART1, $MOOSE.*.PART1
-COPY PART2, $MOOSE.*.PART2
-RESET CONFIGURE COPY UNSTRUCTURED
The CONFIGURE option (COPY UNSTRUCTURED) is reset to avoid applying it to
any subsequent COPY commands accidentally.

To duplicate all the files in volume $BIG to volume $BACKUP, terminating the
DUP[LICATE] process if 10 severe errors occur:
-CONFIGURE ALLOW 10 SEVERE ERRORS
-DUP $BIG.*.*, $BACKUP.*.*

To display the contents of a file containing 8-bit characters (FILE1) and the
contents of a file of 7-bit characters (FILE2):
-CONFIGURE DISPLAYBITS 8
-COPY FILE1
-CONFIGURE DISPLAYBITS 7
-COPY FILE2
PURGE, SAVEID
1
File Utility Program (FUP) Reference Manual—523323-014
2-34
CONFIG[URE] Examples