Switch Clip And Emergency Stop Switch (Side-Mount Type) - Honda Marine BF75A Owner's Manual

Turning the ignition switch key to the
START position operates the starter
motor. The key automatically returns
to the ON position when released
from the START position.
The ignition switch can be used to
operate the starter motor only when
the gearshift lever (p. 19
(neutral) position, and the switch clip
is in the emergency stop switch.
Turning the ignition switch to the
OFF position stops the engine.
Switch Clip and Emergency Stop
Switch (side-mount type)
EMERGENCY
STOP SWITCH
) is in the N
SWITCH CLIP
SWITCH CLIP
CONTROLS AND FEATURES
The switch clip must be inserted in
the emergency stop switch in order
for the engine to start and run. The
lanyard must be attached to the
operator's PFD (Personal Flotation
Device) or worn around the wrist as
shown.
When used as described, the
emergency stop switch and lanyard
system stops the engine if the
operator falls away from the controls.
A spare switch clip is stored in a slot
in the control housing (optional
LANYARD
equipment).
LANYARD
SPARE SWITCH CLIP
21