Festool Compact Saw and Cordless Drill Brochure

When the
result simply
has to be
perfect...
The durability, robustness and low wear
of tools from Festool are legendary.
The No Compromises!™ benefit-oriented
approach that tools from Festool offer is
just as legendary.
What exactly does this mean for you?
Where surface finishing is concerned,
Festool sanders and abrasives are the best
there is. We also offer you a complete
system for fitting and interior fitting, from
compact saws to extremely handy cordless
drills through to high-performance saw
blades and drill bits.
As a specialist for perfect surfaces, for drilling
and sawing, we know exactly how important the
right preparation is for an optimum work result.
Professional support for cutting, stirring and
renovating is offered by our system partner
Protool. With this system combination,
you will have your day-to-day work in the
workshop and on the construction site
completely under control. See for yourself.
The entire Festool range and all service
information can be found at
www.festool.com.au
Now with online shop!
Absolutely accurate assembly and fitting
Compact saws and cordless drills
The most lightweight bench trimming
saw in the world – PRECISIO
»
Perfect for assembly with a weight of
just 19.5 kg
»
Tool-less FastFix saw blade changes
»
Multifunction handle: one handle with
all functions integrated
»
Moving splinterguard for splinter-free
cuts on both sides
When it comes to assembly,
»
Draw the saw blade for quick, precise
maximum precision is what cross cuts up to 300 mm wide
counts – and the assembly
saws and cordless drills from
Festool are exactly the right
»
Scope of delivery: HW saw blade Z32, angle stop,
foldaway legs, 3 x splinterguard, digital MMC electronics,
tools for this: compact, robust
extractor set, workpiece holder, operating tool
and very efficient.
CS 50 EB, Order no. 561 195
$1,769.00 + GST (1,945.90 inc GST)
Easier strip by strip – Compound Mitre Saw SYMMETRIC
»
Patented symmetrical stop system
»
Stops easy to clamp, no tools required
»
Easy angle transfer using a bevel, cutting
along the bisector without making
calculations
Cutting out wood boards and wooden material boards precisely –
Plunge-cut Saw TS 55
»
Precise plunge cuts in materials up to 55 mm thick:
perfect cutting to length of interior doors
»
FastFix: quick and easy saw blade changing
and adaptation to the working material
»
Spring-loaded spacer wedge for unhindered
plunge cuts
»
Attachable splinterguard for high-quality
working results
For furniture assembly and interior fitting – Cordless Drill TDK 12
»
Compact dimensions and perfect weight distribution
»
Handle with Softgrip: good ergonomics
»
Compact gear mechanism and high-performance
motor with replaceable carbon brushes
»
FastFix interface for all FastFix attachments
and CENTROTEC rapid tool-change system
All prices are RRP and valid until 31/12/2005
Drilling and screwdriving in tight
spaces – Cordless Drill C 12
»
Brushless EC-TEC motor for a long
service life and maximum efficiency
» Ultra lightweight and large fastening
capacity with the compact battery
»
Maximum fastening capacity and low
CS 50
®
weight with the standard battery pack
»
FastFix interface for all FastFix
attachments and CENTROTEC rapid
tool-change system
»
Scope of delivery: FastFix chuck 13 mm, CENTROTEC
tool chuck, CENTROTEC spiral drill bit D4, CENTROTEC bit
holder, PZ 2 bit, charger LC 45, spare battery pack C NiCd
1.3 Ah (for C 12 CE-NC-C45-Plus), or S NiCd 2.4 Ah
(for C 12 CE-NC45-Plus), or S NiMH 3.0 Ah
(for C 12 CE-MH45-Plus), in a Systainer
C 12 CE-NC-C45-Plus, Order no. 564 173
Price $544.00 + GST ($599.01 inc GST)
C 12 CE-NC45-Plus, Order no. 564 174
Price $580.91 + GST ($639.00 inc GST)
C 12 CE-MH45-Plus, Order no. 564 175
Price $617.27 + GST ($679.00 inc GST)
® SYM 70
»
Scope of delivery: HW fine-tooth saw blade Z48,
precision adjustable square, operating tool
SYM 70 E, Order no. 561 175
Price $1,079.00 + GST ($1,186.90 inc GST)
»
Scope of delivery: HW fine-tooth saw blade Z 48,
operating tool, guide rail FS 1400/2, 1 splinterguard,
in a Systainer
TS 55 EBQ Plus-FS, Order no. 561 166
Price $790.00 + GST ($869.00 inc GST)
»
Scope of delivery: battery charger LC 45, spare
battery pack 2.4 S NiCd, CENTROTEC tool chuck,
CENTROTEC spiral wood drill bit D4, CENTROTEC bit
holder, FastFix chuck 13 mm, PZ 2 bit, in a Systainer
TDK 12 CE-NC 45-Plus, Order no. 564 137
Price $426.36 + GST ($469.00 inc GST)
... and lots
of power is
called for.
Whether renovating or working in bare brickwork –
Protool's specialist tools for painters are ideal for
tough applications.
Robust drills, high-performance cutters and
sanders and powerful stirring systems ensure
optimum work results.
Thanks to their long service life, high power
and high level of economic efficiency, our
tools have now become indispensable on many
construction sites and in many workshops.
And the development continues: Protool's Projet,
for example, is an innovative stirring system that
redefines paint mixing.
And the paint only really comes into its own when
applied to the perfect sublayer. With Festool we
have the optimum system partner to help you with
exactly this application. After all, our motto is:
Strong alone. Unbeatable together.
Give us a try.
More about the Protool range and all service
information can be found at
www.protool.com.au
9