Honda RDX Owner's Manual page 58

Installing a Child Seat
TETHER STRAP
1. Remove the cargo area cover, and
place it on the cargo area floor (see
page 160).
52
2. (Outer seating position)
After properly securing the child
seat (see page 50), lift the head
restraint, then route the tether
strap over the seat-back and
through the head restraint legs.
(Rear center seating position)
Remove the head restraint (see
page 136). Make sure the removed
head restraint is secured in the
cargo area. Reinstall the head
restraint when the child seat is
removed.
After properly securing the child
seat (see page 50), route the tether
strap over the top of the seat-back.
When you install the child seat in
the rear center seating position,
you cannot use the seat belt
behind the driver's seat.
TETHER STRAP HOOK
3. Attach the tether strap hook to the
anchor, making sure the tether
strap is not twisted.
4. Tighten the strap according to the
seat maker's instructions.
If the tether strap is too long and
cannot be tightened firmly, find a
route where the strap can be
tightened securely.
ANCHOR