Table of Contents
Advertisement
Rigid type
3. Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker's instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
Flexible type
Other LATCH-compatible seats have
a flexible-type connector as shown
above.
4. Whatever type you have, follow the
child seat maker's instructions for
adjusting or tightening the fit.
5. Remove the cargo area cover, and
place it on the cargo area floor (see
page 160).
Installing a Child Seat
TETHER STRAP
6. Lift the head restraint (see page
135), then route the tether strap
through the legs of the head
restraint and over the seat-back,
making sure the strap is not
twisted.
CONTINUED
47
Advertisement
Table of Contents
