Playing an iPod
®
To Play an iPod
®
This audio system can operate the
audio files on the iPod
®
same controls used for the disc
player. To play an iPod, connect it to
the USB adapter cable in the console
compartment by using your dock
connector, then press the CD/AUX
button. The ignition switch must be
in the ACCESSORY (I) or ON (II)
position. The iPod will also be
charged with the ignition switch in
these positions.
The audio system reads and plays
sound files to be playable on the
iPod. The system cannot operate an
iPod as a mass storage device. The
system will only play songs stored on
the iPod with iTunes.
iPod and iTunes are registered
trademarks owned by Apple Inc.
198
(Models without navigation system)
iPod models confirmed to be
compatible with your audio system
with the
using the USB adapter cable are:
iPod classic 80/160 G
iPod classic 120 G
iPod classic 160 G (launch in 2009)
iPod (5th generation)
iPod nano
iPod touch
This system may not work with all
software versions of these devices.
Model
NOTE:
Do not connect your iPod using a
●
hub.
Do not keep the iPod in the
●
vehicle. Direct sunlight and high
heat will damage it.
Do not use an extension cable
●
between the USB adapter cable
equipped with your vehicle and
your dock connector.
We recommend backing up your
●
data before playing it.
Some devices cannot be powered
●
or charged via the USB adapter, if
this is the case use the accessory
adapter to supply power to your
device.