Preparing For Use After Storage; Hoses And Pump; Maintenance - Homelite UT80993A Operator's Manual

Hoses and Pump:

 Fill the detergent tank with clean water and spray through
spray wand until tank is empty to flush any soap residue
from the unit.
 Remove all hoses.
 Empty the pump by pulling on the starter grip and rope
about 6 times. This should remove most of the liquid from
the pump.
NOTE: Regular use of fuel stabilizer and pump protector
will give you better performance of the unit and increase
the life of the pump. See the Replacement Parts List for
available sizes and part numbers of these items and call
customer service at 1-800-242-4672 to order.
WARNING:
Ensure all engine covers and all engine parts are com-
pletely and properly reassembled before starting engine.
Failure to correctly reassemble engine may result in seri-
ous injury or property damage.

MAINTENANCE

PREPARING FOR USE AFTER STORAGE

 Pull the recoil starter grip three or four times to clean oil
from the combustion chamber.
 Remove spark plug from the cylinder. Wipe oil from the
spark plug and return it to the cylinder.
 Reconnect the spark plug wire.
 Refuel the machine as described earlier in the operator's
manual.
Page 15 — English