Advertisement
1
SETTING UP THE PH3
1.4
CONNECTIONS
Connect the power cord to the back of the PH3 and plug it into the nearest wall socket. Use
a 3 lug grounded plug for safety.
To get the best sound from the PH3, avoid any multiple plugs or extension cords.
Connect the input interconnects between the phono preamplifier and the turntable.
If you are using a moving-coil cartridge select the inputs marked MC-L and MC-R. To
connect a moving-magnet cartridge use the inputs marked MM-L and MM-R.
Note: Both inputs can be connected simultaneously if no hum is generated. In that case, the
front panel selecting the inputs acts a source selector between the two cartridges or tone-
arms.
Plug the output interconnects from the RCA female sockets (labeled "output") to the
preamplifier.
User manual – Goldmund PH3 Phono Preamplifier
5
Advertisement
