Goldmund SR150 User Manual

Goldmund SR150 User Manual

2-channel universal power amplifier

Advertisement

USER MANUAL
SR150 2-CHANNEL
GOLDMUND
Universal Power Amplifier

Advertisement

Table of Contents
loading

Summary of Contents for Goldmund SR150

  • Page 1 USER MANUAL SR150 2-CHANNEL GOLDMUND Universal Power Amplifier...
  • Page 2 - networking and music distribution. The guiding principle at Goldmund is to produce a precise sound with the least possible loss of quality through the different stages. Goldmund will never adopt a technology before it is sufficiently developed to satisfy the high quality standards we set.
  • Page 3 No connection or manipulation must be done before reading those instructions. Damage to the amplifier may result if the following instructions are not consciously understood and applied. SR150 2-CHANNEL Universal Power Amplifier User manual - SR150 2-CHANNEL UNIVERSAL POWER AMPLIFIER...
  • Page 4 Protection against DC. Protection against short-circuits. MAINTENANCE TECHNICAL DATA Power Frequency response Analog input sensitivity Group delay Distortion Speed Noise D/A Converter Operating temperature Power supply Size and weight Warranty p 9 - 10 User manual - SR150 2-CHANNEL UNIVERSAL POWER AMPLIFIER...
  • Page 5: Choice Of Amplifier Location And Cooling

    WARNING IF YOU NEED TO RETURN THE SR150 TO THE FACTORY OR TO YOUR LOCAL REPRESENTATIVE FOR A WARRANTY REPAIR, PLEASE NOTE THAT IT MUST BE REPACKED IN THE ORIGINAL PACKAGING.
  • Page 6: Line Voltage Adjustment

    ATTENTION On the 220V position, the GOLDMUND SR150 amplifier will function properly for AC voltages between 200V and 245V. On the 110V position, the AC line must deliver between 95V and 125V. If your AC line is usually out of these tolerances, please consult your GOLDMUND dealer.
  • Page 7 It is absolutely normal that a slight sound is heard from the speakers when the amplifiers are turned ON or OFF. The SR150 is self-protected and the sound heard is corresponding to the charging and discharging of the capacitors.
  • Page 8: S O U N D Q U A L I T Y O P T I M I Z At I O N

    Be patient… Mains line phase inversion The sonic quality of your GOLDMUND SR150 can be greatly improved if the mains AC line is properly connected. Try to invert the AC plugs of both your amplifiers, using special adapters.
  • Page 9: Safety And Precautions

    (often true for tube preamps and some 5 channel processors), the speakers could easily be damaged by the amplified DC. The SR150 protects itself from such an accident by a feedback DC control that limits the DC amplified by the circuit.
  • Page 10: Technical Data

    M A I N T E N A N C E The GOLDMUND SR150 amplifier usually requires no maintenance. To clean your SR150 use a very soft, clean, damp cloth to avoid scratching the surface. Dampen with water or a mild detergent solution. Avoid abrasive or harsh cleansers (eg.
  • Page 11 D / A C O N V E R T E R • Using a plugged-in Goldmund Alize4 2-channel D/A module protected against static. O P E R AT I N G T E M P E R AT U R E •...

Table of Contents