Function Information - Fujitsu UTB-UUB Operating Manual

FUNCTION INFORMATION

Depending on the indoor unit model, some buttons on this remote controller cannot be used and some functions are re-
stricted.
Refer to the following table for the buttons that can be used for each model.
: Button can be operated
: Button cannot be operated
Model
*1
Wall Mounted Type
*2
(I.A.Q. Model)
*3
*2
Wall Mounted Type
*3
Wall Mounted Type
(AIRSTAGE Model)
Duct type
Cassette Type
Floor/Ceiling
Universal Type
Ceiling Wall Type
If a button indicated with " " is pressed, the operation lock display (I on page 1) flashes, but the air conditioner will not
respond.
*1: Air clean operation is always on during air conditioner operation and cannot be turned off.
*2: If the wired remote controller is connected to the indoor unit, a wireless remote controller cannot be used.
*3: Before connecting the remote controller, the remote controller cord must be modified.
*4: The fan speed cannot be changed for some large, duct-type indoor units.
*5: This button cannot be operated for the AIRSTAGE S-series remote controllers.
*6: This button cannot be operated for the AIRSTAGE J-series and V-series remote controllers.
*7: This button cannot be operated if the indoor unit has manually-operated horizontal airflow direction louvers.
1 2 3 4 5
*5
*4 *5
*5
*5
*5
Button numbers (refer to page 1)
6 7 8 9 0
*6
*6
*6
*6
*6
A B C D
*7
*7
En-2