Table of Contents
Advertisement
GET TO KNOW
THE REMOTE
CONTROL,: MBR3447
AUTO
FIND
OPTION
If you have tried all the codes listed in the code table for your brand and type of product,
and none of those codes operate
your
equipment,
you can use Auto Find to search for the code you need.
Follow these steps for each product
you are using:
To auto find a code
1.
Turn the product
ON.
2.
Press and hold PRG
until the indicator
lights.
3.
Press the mode key on the remote
for the product
you want to
control:
TV, VCR,
CABLE,
or AUX.
4.
Enter code 0-(O0,
then press ENTER.
When the indicator
light
flashes three times and remains
lit, Auto Find is active.
5.
Point tile remote
toward
the product
and press and release
POWER.
repeating
this action until the product
turns OFF.
6.
Press ENTER
immediately
to save the code. If your remote
fails
to operate
the functions
you use most often, you can re-enter
Auto Find and search for a better code.
Noles:
O
The indicator
light shouM flash OFF wher_ you press
POWER
and back ON when you release it. If the indicator
light stays on when you press POWER,
Auto Find has
tried all available
codes.
[f you finish Auto Find and the
product
you want to control has not turned off, your remote
cannot control that product.
O
Pressing
PRG
at any time during the use of Auto Find will
cancel Aulo Find, and you will have to start again.
Equipment to be
controlled
Typical
Remote
Control
Advertisement
Table of Contents
