Table of Contents
Advertisement
SETUP MENU
TUNING
BAND
Purpose
Allows for setting the TV channel selector (tuner) to match
your antenna or cable-TV system.
If you are having difficulty tuning channels, the TUNING
BAND may have to be set manually to match your viewing
needs.
NOTE:
TUNING BAND can only be used with ANT/
CABLE 1 or 2 Source selection.
AUTO PROGRAM
CH. ADD/DEL
CH. LABELS
TUNING BAND
AUTO TUNING
SOURCE ID
CLOCK SET
CAPTIONS
J [
CABLE-CAW
•
J
Selecting Tuning Band
To Use TUNING BAND
Press ADJUST (ADJ) Left/Right to select the tuning band that
gives you the most channels:
•
BROADCAST m is used for standard "over-the-air" broad-
casts.
•
CABLE m CATV is used for most standard cable-TV
(CATV) systems.
•
CABLE m HRC is used for cable-TV systems that use HRC
(Harmonically Related Cartier).
•
CABLE m ICC is used for cable-TV systems using ICC
(Incremental Coherent Carrier).
Available Channels per Band
The channels that are available in the broadcast and cable tun-
ing bands are shown below:
BROADCAST
Band _ VHF 2 to 13, UHF 14 to 69
CATV, HRC and ICC Bands _
1 to 125
AUTO TUNING
Purpose
Lets your TV compensate for variations in broadcast and
cable-TV frequencies.
AUTOPROGRAM
CH.ADD/DEL
CH. LABELS
TUNINGBAND
AUTOTUNING
SOURCE ID
CLOCK SET
CAPTIONS
]
I
FIXED
Selecting Auto Tuning
If you are having difficulty tuning channels, the AUTO TUN-
ING may have to be set manually to match your viewing
needs.
NOTE:
AUTO TUNING can only be used with ANT/
CABLE 1 or 2 Source selection.
To Use AUTO TUNING
Press ADJUST (ADJ) Left/Right to select the mode of opera-
tion that gives you the most channels:
•
FIXED is used to receive "over-the-air"
TV stations, and
with many cable-TV systems.
•
SEARCH is used only when the TV must search to find the
frequency being received, such as when used with certain
VCRs and video game controllers.
SOURCEID
Purpose
Assigns a descriptive "name" to the input sources. For exam-
ple, the VIDEO 1 source may be named VCR. "VCR" now
appears in the source menu as a reminder that your VCR is
connected to VIDEO 1 input jacks.
To Use SOURCE
ID
1.
Press
ADJUST
(ADJ)
Left/Right
to view
the
SOURCE
ID screen.
2.
Use SELECT
Up/Down
to select a SOURCE.
3.
Use ADJUST
(ADJ) Left/Right
to select the desired
name for the source.
b, UTO PROGRAM
CH. ADD/DEL
CH. LABELS
TUNING BAND
AUTO TUNING
SOURCE ID
CLOCK SET
CAPTIONS
I [
LABEL
Selecting
Source
ID
(continued on next page)
z736-o
7 -- 3
Advertisement
Table of Contents
