O Program Play - Zenith DVD2250 Operating Manual & Warranty

PAGE 32 I ADVANCED OPERATION
Note: Program play function is possible only with
audio CDs, It does not work with DVD movie discs.
The player plays the tracks in the disc in an order
you specify.
D Press PROGRAM during playback or stop
mode.
The program playback screen appears on the TV
screen.
1
• To exitthe screen,press PLAYor PROGRAM.
B Press _Y/"<I/I_ and press the numeric
button(s), to select the desired track number.
The selectedtrackis storedin the memory.
• Repeat step 2 to select another track.
• Up to 20 tracks can be programmed.
D Press PLAY.
Play nowbegins in the programmed sequence.
After playback
Play is stopped and the program playback screen is dis-
played.
Clearing the program
• To clear the program one by one
Press ,L/Y/,d/I_. to select the unwanted No. and then press
CLEAR.
• To clear all the programs
Press ,/Y/'q/l_ to select the =Clear All" and press
SELECT/ENTER.
(The programs are also cleared when the power is turned off
or the disc is removed.)
lira(
0 This function is not supported for DVD discs.