131Connecting To A Tv - Zenith DVD2250 Operating Manual & Warranty

CONNECTIONS I PAGE 13
Connect the DVD video player to your TV
f
(white) {red) {yellow)
L R V
To AUDIO/VIDEO OUT
Audio video cable
(supplied)
To COMPONENT
VIDEO OUT
(blue) {red) (yellow)
ro S-VIDEO OUT
S-video cable
(supplied)
To video input
{yellow)
To S-video Input
Video cable (Y, Cb, Cr) (not supplied)
TV or monitor with
audio video inputs
O Refer to the owner's manual of your TV as well.
o When you connect the DVD video player to your IV, be sure to turn off the power and unplug both units from the wall outlet
before making any connections.
o If your television set has one audio input, connect the DVD video player to a Y cable adapter (not supplied) and then connect
to your "IV.
Connect the DVD video player to your "IV directly, if you connect the DVD video player to a VCR, the playback picture will be
distorted because DVD video discs are copy protected.
Warning
Do not set the DigitalAudioOutputof this DVD playerto "DolbyDigital" unlessyouare connecting the coaxialdigitalaudiojack of
thisDVD playerto an AV decoder that has the DolbyDigital(AC-3) decodingfunction. High volumesoundmay damageyourhear-
ing as well as the speakers, (Refer to =SaleclJng DigitalAudioOutput"on page 39.)