Installation - White-Westinghouse WWSS2601KW3 Use & Care Manual

This Use &Care Manual provides general operating instructions
foryourmodel. Use therefrigerator only asinstructed inthis
Use &Care Manual. Before starting therefrigerator, follow
these
important first steps.
LOCATION
• Choose a place that is near a grounded electrical outlet.
Do Not use an extension cord or an adapter plug.
• If possible, place the refrigerator out of direct sunlight
and away from the range, dishwasher or other heat
sources.
• The refrigerator must be installed on a floor that is level
and strong enough to support a fully loaded refrigerator.
• Consider water supply availability for models equipped
with an automatic ice maker.
iNSTALLATiON
Guidelines for final positioning of your refrigerator:
• All four corners of the cabinet must rest firmly on the
floor.
The cabinet should be level at the front and rear.
The sides should tilt ¼-inch (6 ram) from front to back (to
ensure that doors close and seal properly).
Doors should align with each other and be level.
All of these conditions can be met by raising or lowering
the adjustable front rollers. To level the cabinet using the
front rollers:
1 Open both doors and remove the toe grille by gently
pulling forward (see illustration).
2 Close the doors and use a fiat-blade screwdriver or
3/8-inch socket wrench to raise or lower the front rollers.
3 Ensure both doors are bind-free with their seals touching
the cabinet on all four sides.
Installation Clearances
• Allow the following clearances for ease of installation,
proper air circulation, and plumbing and electrical
connections:
Sides & Top 3/8"
Back 1"
DOOR OPENING
Your refrigerator should be positioned to allow easy access to
a counter when removing food. For best use of drawers and
freezer baskets, the refrigerator should be in a position where
both the refrigerator and freezer doors can be fully opened.