White-Westinghouse WWTR1802KW6 Use & Care Manual page 6

To Remove Freezer Handle,"
(Handles may be easier to reverse while doors are off.)
1. Remove two screws attaching handle to bottom of
freezer door.
2. Swing bottom of handle away from the door and
slide handle straight up and off of dovetail button.
3. Remove screw and dovetail button and install on
other side, using the same holes as nameplate.
4. Self-Adhesive Nameplate Models: Use putty
knife to gently peel off nameplate from door and
reapply over old handle holes.
To attach freezer handle;
1. Start with handle offset away from door. Place top
of handle over dovetail button, swing handle into
an upright position and pull downward, locking it
into place.
2. Secure bottom of handle with two screws removed
earlier.
Self Adhesive
Nameplate N_
(sore
To Remove REFRIGERATOR Handle;
.
3.
(Handles may be easier to reverse while doors are off.)
1. Remove two screws attaching handle to top of
refrigerator door.
Swing top of handle away from door and slide
handle down and off of dovetail button.
Remove screw and dovetail button and install on
other side, moving hole plugs from corresponding
holes to opposite side.
To attach Refrigerator Handle;
.
Start with handle offset away from door. Place
bottom of handle over dovetail button, swing
handle into an upright position and pull upward,
locking it into place.
.
6