Front Audio Connector - Foxconn 661MXPlus Easy Installation Manual

3. CPU FAN & FAN1
Plug the CPU cooling fan cable into the 3-pin CPU FAN power supply on the
motherboard. Connect the case cooling fan connector to FAN1.

4. Front Audio Connector

The audio interface provides two kinds of audio output choices: the Front Audio,
the Rear Audio. Their priority is sequenced from high to low (Front Audio to Rear
Audio). If headphones are plugged into the front panel of the chassis (using the
Front Audio), then the Line-out (Rear Audio) on the rear panel will not work. If you
do not want to use the Front Audio, pin 5 and 6, pin 9 and 10 must be SHORT, and
then the signal will be sent to the rear audio port.
SENSE
+12V
GND
CPU FAN
1
1
MIC_IN
MIC_PWR
AUD_OUT_R
NC
AUD_OUT_L
9
F_ AUDIO
5
1
GND
+12V
SENSE
FAN1
2
MIC_GND
+5VA
AUD_RET_R
Empty
AUD_RET_L
10