Foxconn 925XE7AA series User Manual page 23

SPDIF coaxial out port
5
This port connects to external audio output devices with coaxial cable connector.
1394b Port
6
This digital interface supporting electronic devices such as digital cameras,
scanners, and printers implements IEEE 1394b standard that allows up to 800
Mbps transfer rates, and increase the computer-to-electronic device operational
distance from 4.5 meters to 100 meters. IEEE 1394b maintains backward
compatibility with 1394a(400 Mbps).
USB 2.0 Ports
7
These four Universal Serial Bus (USB) ports are available for connecting USB
2.0/1.1 devices.
LAN Port2 (-L/-K) (optional)
8
This port controlled by BCM4401/BCM5788 with PCI interface allows 100M/1G
connection to a Local Area Network (LAN) through a network hub.
LAN Port1 (-K)
9
This port controlled by BCM5789 controller with PCI Express x1 interface allows
1G connection to a Local Area Network (LAN) through a network hub.
Line in, Line out, Microphone (for 2/6-channel models)
10
When using a 2-channel sound source, the Line out jack is used to connect to
speaker or headphone; the Line in jack connects to an external CD player, tape
player or other audio device. The Microphone jack is used to connect to the
microphone.
When using a 6-channel sound source, connect the front speaker to the green
audio output; connect the rear speaker to the blue audio output; connect the
center speaker/subwoofer to the red Microphone output.
Line in, Line out, Microphone, Rear, LEF/CEN, Side Jacks (for 8-channel
1 1
models)
When using an 8-channel sound source, connect the front speaker to the green
audio output; connect the rear sound speaker to the black audio output; con-
nect the center speaker/subwoofer to the orange audio output; connect the side
sound speaker to the grey audio output.
Chapter 2
925XE7AA Series User Manual
Installation Instructions
15