Foxconn 925XE7AA series User Manual page 21

Power Supply
This motherboard uses an ATX power supply. In order to avoid damaging any
devices, make sure that they have been installed properly prior to connecting
the power supply.
4-pin ATX_12V Power Connector: PWR2
The ATX power supply connects to PWR2 and provides power to the CPU.
24-pin ATX Power Connector: PWR1
PWR1 is the ATX power supply connector. Make sure that the power supply
cable and pins are properly aligned with the connector on the motherboard.
Firmly plug the power supply cable into the connector and make sure it is secure.
Attention:
We strongly recommend you use
24-pin power supply. If you want to
use 20-pin power supply, you need
to align the ATX power connector
according to the right picture.
Chapter 2
925XE7AA Series User Manual
Installation Instructions
1 2
GND
GND
12V
12V
3
4
4-pin ATX_12V power connector
+5V +5V_AUX
GND GND
GND PWROK
+5V
1
13
+3.3V GND GND RSVD
-12V GND
GND
+5V
PSON
24-pin ATX power connector
+3.3V
+12V
+12V
12
24
+5V
+5V GND
13