Power Management Setup - Foxconn NF4K8AC series User Manual

Power Management Setup

ACPI Suspend Type
This option is used to set the energy saving mode of the ACPI function.
When you select "S1 (POS)" mode, the power will not shut off and the
supply status will remain as it is, in S1 mode the computer can be resumed
at any time. When you select "S3 (STR)" mode, the power will be cut off after
a delay period. The status of the computer before it enters STR will be saved
in memory, and the computer can quickly return to the previous status when
the STR function wakes. When you select "S1 & S3" mode, the system
will automatically select the delay time.
Power Management
This option is used to set the power management scheme. Available settings
are: User Define, Min Saving and Max Saving.
Power Management Events
Press <Enter> to set Power Management Events. Please refer to page 38.
Soft-Off by PBTN
This item is used to set the power down method. This function is only valid
for systems using an ATX power supply.
When "Instant-Off" is selected, press the power switch to immediately turn off
power. When "Delay 4 Sec." is selected, press and hold the power button for
four seconds to turn off power.
Intruder Detection
This item enables or disables the features of recording the chassis intrusion
status and issuing a warning message if the chassis is once opened.
PWRON After PWR-Fail
This option is used to set what action the PC will take with the power supply
when it resumes after a sudden power failure. The available options are: Off
(remain in turn off status),On (auto power on) and Former-Sts (resume with the
previous status).
37
Power Management Setup Menu
Chapter 3 BIOS Description
2005-4-18, 16:14
37