Installation Of Cpu - Foxconn NF4K8AC series User Manual

This motherboard supports Athlon
1GHz for extremely high throughput (8.0GB/sec) and Hyper Transport
Technology.
Attention:
The CPU pins must be properly aligned with the holes in the
socket, otherwise the CPU may be damaged.
For the detailed CPU vendor list qualified on this motherboard, please visit
the website: http://www.foxconnchannel.com

Installation of CPU

Follow these steps to install the CPU.
1. Unlock the socket by pressing the le-
ver sideways, then lift it up to a 90
angle.
2. Align the cut edge to the gap in the base
of the socket. Carefully insert the CPU
into the socket until it fits in place.
3. When the CPU is in place, press it
firmly on the socket while you push
down the socket lever to secure the
CPU. The lever clicks on the side tab
to indicate that it is locked.
Chapter 2 Installation Instructions
64FX/Athlon 64 processors running at
TM TM
o
Cut edge
TM
Gap in the base
Push down the socket
lever to secure the CPU.
9