Other Connectors - Foxconn 915PL7AE series User Manual

Other Connectors

This motherboard includes connectors for floppy devices, IDE devices,serial
ATA devices, USB devices, IR module, and others.
FDD connector: FLOPPY
This motherboard includes a standard FDD connector, supporting 360 K, 720
K, 1.2 M, 1.44 M, and 2.88 M FDDs.
HDD connector: PIDE
This motherboard includes one Ultra DMA 100/66/33 IDE connector. We sug-
gest you connect the cable's blue connector to the IDE connector, then connect
the black connector to the master device and connect the grey connector to the
slave device. If you intend to install two hard disks, you must configure the
second drive as a slave device by setting the jumper accordingly. For details,
please refer to the hard disk documentation for the jumper settings.
Front Panel Connector: FP1
This motherboard includes one connector for connecting the front panel switch
and LED indicators.
IDE LED Connector (HD-LED)
The connector connects to the case's IDE indicator LED indicating the activity
status of hard disks.
Reset Switch (RESET)
Attach the connector to the Reset switch on the front panel of the case; the
system will restart when the switch is pressed.
17
Chapter 2 Installation Instructions
PWRLED P W R S W
+ -
1
+ -
HD-LED R E S E T
2005-5-26, 17:35
FP1
NC
17