Foxconn 915G7MC User Manual page 23

Audio Connectors: CD_IN, AUX_IN (optional)
CD_IN, AUX_IN is Sony standard CD audio connectors, it can be connected to a
CD-ROM drive through a CD audio cable.
CD_L
Speaker Connector: SPEAKER (optional)
The speaker connector is used to connect speaker of
the chassis.
Wake-Up On LAN: WOL (optional)
Through the Wake-Up On LAN function, a wake event
occurring from the network can wake up the system. To
utilize this function, please be sure an ATX 12V power
supply with a 5VSB line capable of delivering a current
of at least 1A, and a LAN adapter which supports this
function. Then connect the header to the relevant con-
nector on the LAN adapter.
S
The S/PDIF out connector is capable of providing digi-
tal audio to external speakers or compressed AC3
data to an external Dolby digital decoder.
Note: The empty pin of SPDIF cable should be aligned
to empty pin of SPDIF out connector.
16
Chapter 2
CD_IN
CD_R
GND
Installation Instructions
AUX_IN
AUX_R
AUX_L
GND
1
S P K Empty
NC
SPEAKER
1
5V _SB_SYS
GND
Signal for waking up
WOL
GND
SPDIF_OUT
Empty
5V_SYS
SPDIF_OUT
SPKJ