Measurement Function Knob - Fluke 183 User Manual

True RMS Digital Multimeters
Front and Rear Panel Overview

Measurement Function Knob

A Hz
Hz
V A
V
OFF
OFF
183 185
ahr04f.eps
OFF -Turns off the meter. Setup parameters and stored measurements are
saved.
-
V Volts AC RMS, Volts DC, Volts AC DC dual display, Volts AC+DC total
RMS, dB, and dBm.
-
Hz Frequency measurements. Duty factor also shows if it is turned on in the
Setup menu.
Re/G -
Access to resistance and continuity measurements and diode
test.
E-
Capacitance measurements.
T
- Temperature measurements in degrees Celsius or Fahrenheit.
-
A Amps AC RMS, Amps DC, Amps AC + DC total RMS, Amps AC DC dual
display, and Amps DC 4-20 mA% (process control loop measurement).
Figure 4. Measurement Function Knob
9