Start.upguide; Before Using Your Dishwasher - Whirlpool GUI500XTKQ0 Use & Care Manual

GU1200
2 4 8
Delay Hours
_ ® • • • • o • •
J
_-_ J Sensing/ W_ter Washing R_ns_ng D_ng Clean San_ized Refill
SENSINGWASH C YCLES OPTIONS So_k_,_ H_t,,g R,,,eAi_
© ©
Rinse Only Quick Wash China C_ystal Normal Pots & Pans Soak & Hi-Temp Sani- Air Dry
Scour Scour Rinse
Cancel
Dra_n
GU1500
Delay Hours
_ o • • •
sensing/ Water Olean Sanitized R_II
J Soaking Heating R_nseA_d
SENSING WASH
CYCLES OPTIONS
RinseOnly Gu_ckWash Ch_naCrysfal Normal Pots&Pans Anti-Bacterial Soak & Ht-Temp Sani=
Scour Scour Rinse
Air Dry
Cancel
Drain
START.UPGUIDE
Before using your dishwasher, remove all packaging materials.
Read this entire Use and Care Guide. You will find important
safety information and useful operating tips.
1,
2.
Scrape large food soil and hard items (toothpicks or bones)
from dishes.
Properly load the dishwasher. (See "Dishwasher Loading.")
Make sure nothing prevents the spray arm(s) from spinning
freely.
5. Press the desired cycle and option selections. The
dishwasher starts filling when you press a cycle. You can
select options as the machine fills. (See "Dishwasher Use.")
IM PORTANT:
When the cycle starts, you will see a rotating pattern of lights
in the display window indicating that the unit is operating.
3,
4,
Add detergent and check the rinse aid dispenser. Add rinse
aid if needed. (See "Dishwasher Use.")
Push door firmly closed. The door latches automatically. Run
hot water at the sink nearest your dishwasher until the water
is hot. (See "Dishwasher Efficiency Tips.") Turn off water.
This pattern will continue for up to 6 minutes while the
multiple sensors check the incoming water temperature, rinse
aid usage and soil level on dishes and cookware. The sensors
then determine the ideal cycle for your dish load. After
sensing is complete, the display will show the number of
minutes left in the cycle and the cycle countdown will begin.
The cycle countdown pauses and the water heating light
glows while the dishwasher heats the water to a set
temperature. (See "Cycle Selection Chart.")
6