Advertisement
Specifications
Sheet Capacity
20# (74gsm)/DIN A4, 70 g/m
2
Entry Width
Shred Size
Shredding Speed
Recommended Daily Usage
Power Source
Dimensions (HxWxD)
Overload Protection
This shredder is protected by a built-in thermal overload device that serves to protect
the motor from overuse. When continuous shredding is conducted for an extended
period of time, the shredder will automatically turn itself off to cool down. When
shredding is automatically stopped, allow the unit to stand for about 30 minutes
before using it again.
Important Note
This paper shredder is not intended to shred high volumes of paper. Please refer to
the specifications for the recommended daily usage and sheet capacity of this
shredder. Please note that if the paper is wider than the entry, and you fold it to fit,
the paper thickness increases and the recommended capacity may be exceeded.
Limited Warranty
Fellowes Manufacturing Company warrants the cutting cylinders of all
Fellowes shredders to be free from defects in material and workmanship
for 1 year from the date of purchase by the original consumer. Fellowes
warrants all other parts of the machine to be free of defects in material
and workmanship for 1 year from the date of purchase by the original
consumer. If any part is found to be defective during the warrant period,
your sole and exclusive remedy will be repair or replacement, at Fellowes'
option and expense, of the defective part.
This warranty does not apply in cases of abuse, mishandling or
unauthorized repair. ANY IMPLIED WARRANTY, INCLUDING THAT OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY
LIMITED IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET
FORTH ABOVE. In no event shall Fellowes be liable for any consequential
or incidental damages attributable to this product. This warranty gives you
specific legal rights. You may have other legal rights that vary from state
to state.
For more detail or to obtain service under this warranty, please contact
Fellowes Customer Service at 1-800-955-0959, Monday through Friday, 8
AM - 5 PM (Central Standard Time).
For specific instructions on obtaining service under this warranty on
machines purchased outside the USA, contact the appropriate location
Contact for Service
listed in the
Warrantor: Fellowes Manufacturing Company.
FS3
3
5-3/4" x 13-11/16" x 3-3/8"
section of this instruction manual.
Without Basket
FS5
FS3+
5
9"/230mm
1/4"/7mm
14 fpm/4.2 mpm
30 sheets
120V/60Hz (North America)
230-240V/50Hz (Europe)
146 x 348 x 86 mm
Declaration of Conformity
Fellowes Manufacturing Company
Doncaster Road, Kirk Sandall • Doncaster, South Yorkshire, DN31H
declares that the product Models FS3, FS3+, FS5, FS5+
conforms with the requirements of the Low Voltage Directive (73/23
EEC) and the Electromagnetic Compatibility Directive (89/336 EEC) and
the following harmonized European Normes (EN Standards) and IEC
Standards.
Safety: EN60950 'Information Technology Equipment'
EMC:
Standard
Severity Level
EN 55014-2:1997
Categpry Level
EN 55104-1:1993
+A1:1997
EN 61000-3-2:1995
Class A
EN 61000-3-3:1995
Section 6.1 (FS3)
EN 61000-3-3:1995
Section 5 (FS5)
Itasca, Illinois, USA
March, 2000
With Basket
FS5+
S5
3
5
5
14-1/4" x 13" x 8-1/4"
362 x 330 x 210 mm
England
Performance
Criteria
NA
NA
NA
NA
NA
_____________________
Anthony Storrie
3
Advertisement
