Configuring Poe Port Labels; Power Cycling Connected Pds; Displaying Poe Settings And Statistics; Clearing Statistics - Extreme Networks ExtremeWare XOS Guide Manual

Displaying PoE Settings and Statistics

To display the current operator limit on each port, use the following command:
show inline-power configuration ports <port_list>

Configuring PoE Port Labels

You can assign labels to a single or group of PoE ports using a string of up to 15 characters. Use the
following command to assign a label to PoE ports:
configure inline-power label <string> ports <port_list>
To rename a port or to return it to a blank label, reissue the command.
To display the PoE port labels, use the following command:
show inline-power configuration ports <port_list>

Power Cycling Connected PDs

You can power cycle a connected PD without losing the power allocated to its port. Use the following
command:
reset inline-power ports <port_list>

Displaying PoE Settings and Statistics

You can display the PoE status, configuration, and statistics for the system, slot, and port levels.

Clearing Statistics

You can clear the PoE statistics for specified ports or for all ports. To clear the statistics and reset the
counters to 0, use the following command:
clear inline-power stats ports [all | <port_list>]

Displaying System Power Information

You can display the status of the inline power for the system and, for additional information, display
the power budget of the switch.
Displaying System PoE Status
To display the PoE status for the switch, use the following command:
show inline-power
113
ExtremeWare XOS 11.1 Concepts Guide