Ethernet Automatic Protection Switching
Multiple EAPS Domains
This section illustrates how you can work with more than one EAPS domain.
EAPS Data VLAN Spanning Two Rings Connected by One Switch
Figure 16
shows how a data VLAN could span two rings interconnected by a common switch—a
"figure eight" topology. In this example, there is an EAPS domain with its own control VLAN running
on ring 1 and another EAPS domain with its own control VLAN running on ring 2. A data VLAN that
spans both rings will be added as a protected VLAN to both EAPS domains. In
have two instances of EAPS domains running on it: one for each ring.
Figure 16: EAPS data VLAN spanning two rings interconnected by one switch
S 3
Ring 1
S 2
P
ExtremeWare XOS 11.1 Concepts Guide
S 4
S 5
S
S 1
Master
node
Figure
S 6
S 7
Ring 2
S
Master
S 8
node
P
S 9
16, switch S5 will
EW_073
272