Waste Disposal; Motor Oil Disposal; Adjustments; Battery Disposal - Exmark Lazer Z Advantage series Operator's Manual

4.2.14 Motion Control Damper Adjustment
a) The top damper mounting bolt can be adjusted to obtain a more desired
motion control lever resistance. See Figure 15 for mounting options.
4.2.15 Caster pivot bearings pre-load adjustment.
a) Remove dust cap from caster and tighten
nyloc nut until washers are flat and back
off 1/4 of a turn to properly set the pre-load
on the bearings. If disassembled, make
sure the spring washers are reinstalled as
shown in Figure 16.

5. WASTE DISPOSAL

5.1 MOTOR OIL DISPOSAL

Engine oil and hydraulic oil are both pollutants to the environment. Dispose of used oil at
a certified recycling center or according to your state and local regulations.

5.2 BATTERY DISPOSAL

FIGURE 15
DANGER
POTENTIAL HAZARD
♦ Battery electrolyte contains sulfuric acid,
which is poisonous and can cause severe
burns
WHAT CAN HAPPEN
♦ Swallowing electrolyte can be fatal or if it
touches skin can cause severe burns.
HOW TO AVOID THE HAZARD
♦ Wear safety glasses to shield eyes, and
rubber gloves to protect skin and clothing
when handling electrolyte.
♦ Do not swallow electrolyte.
37
FIGURE 16