Table of Contents
Advertisement
SYMPTOM
CAUSE
(AND
REMEDY)
No power.
Check that the Ac power
Cord is connected.
• Turn on the unit.
The remote does not
•
Remove any obstacles between
the remote and the unit.
function.
•
Use the remote near the unit.
•
Point the remote at the remote sensor on the unit.
•
Replace the battery in the remote with
a new one.
Bad
Picture
(SnOw,
' Check
the
location
0f the antenna
and adjust
it if
mu[tiple
images_
neccessary.
distorti0n,
blurry)
, Make sure the antenna cable iS conne(ted
firmly.
Make sure al! input
cables are firmly
connected_
No sound.
• Increase the volume.
• Check whether
the mute function
has been activated
on
the Remote Control.
Black
and
white
• Check the Picture setting within
the Setup menu.
picture.
Check to make sure the program
you
are Watching
is
broadcast in Color and not Black & White.
No picture or sound.
• Make sure the unit is plugged
in and turned on.
• Make sure that the TV mode is selected.
• Try a new channel
to check for possible station trouble.
• Make sure the antenna
is connected
properly.
• Increase the volume.
•
Make sure the antenna
or audio/video
source device
is
working
properly.
• Make sure all cables are connected
firmly.
• Check for local
interference.
Colored
patches
of
, Make sure there are no unshielded
electrical
devices nearby
picture:
that are Causing interferencel
,, Turn the TV off for 30 minutes, then try it again.
-21
-
Advertisement
Table of Contents
