Troy-Bilt Horse 682J Operator's Manual page 57

MODELS 682J & E682L
Parts List
REF PART
NO. NO. DESCRIPTION QTY.
STANDARD TILLING TINES
1 1901975 Tine Holder-welded steel, fits
left or right sides ...................... 2
2 1982612 Bolt-hex hd., 3/8-16 x 2"............. 4
6 GW-1270-1 Bolo Tine-single, left hand. Used
on left and right side tine assy.
Tine is stamped either "EL" or
"AL".......................................... 8
7 GW-1270-2 Bolo Tine-single, right hand. Used
on left and right side tine assy.
Tine is stamped either "ER" or
"AR'. ........................................ 8
8 710-3005 Bolt-hex hd., 3/8-16 x 1"............. 16
10 712-0375 Locknut-hex, 3/8"-16 .................. 20
--- 290-253-081 Tine Replacement Kit-unassembled
(IncL eight each of Ref. No.'s 6,
and 7, sixteen each of Ref. No.'s
8 and 10). Includes easy-to-
follow installation instruction. DOES
NOT INCLUDEtine holders, holder
mounting hardware, or tine
shaft keys................................. 1
REF PART
NO. NO. DESCRIPTION QTY.
CUSTOMTILLINGTINES
Special hard-faced, high-chrome carbon alloy tines that are
thicker than standard Bolo Tines. Thesetines better resist the
abrasive action of rocky, gritty or sandy soil as compared to
standard Bolo Tines, and are especially suited for custom
tilling or market gardening.
GW-10802
GW-2475-1
GW-2475-2
Custom Tilling Tine Kit-(Incl.
eight each of Part GW-2475-1
and GW-2475-2 tines and sixteen
each of Ref. No.'s 8 and 10 ...... 1
Bolo Tine, Custom Tilling-single,
left hand................................... 8
Bolo Tine, Custom Tilling-single,
right hand ................................ 8
57