Troy-Bilt Horse 682J Operator's Manual page 13

Section 3: Features andControls
The tiller handlebars can be swungout
30°to the right side for use onlywith the
PTO Chipper/Shredder attachment. This
is done by looseningthe mounting bolt
on the handlebar base. Never operate
your tiller or attachments, otherthan the
PTO Chipper/Shredder,with the handle-
bars in the right side position. Doing so
could result in unsafe handling and
personal injury.
Engine Controls
Referto the engine manufacturer's Engine
Owner's Manual (included in the tiller lit-
erature package)to identify the controls
on your engine.
IMPORTANT:An engine On/Off switch, a
secondary throttle control, a choke lever
and a fuel line shut-off control may be
located on the engine. Refer to your
Engine Owner's Manual for detailed
information.
EngineThrottle Lever
Use the throttle lever (G, Figure 3-1) to
adjust engine speed as well as to start
and stop the engine.
Move the lever away from the STOP
position before starting the engine.
Engine speeds are variable and range
between the FASTand SLOW. Use the
STOPposition to turn the engine off.
NOTE: A secondarythrottle lever is
located on the front of the 8HP and IOHP
engines. A separateOn/Offsw_ch may
also be availableon the engine. (See
Engine Owner'sManualfor information.)
KeyswitchStarter
The keyswitch starter on electric start
models (A, Figure 3-5) hasthree
positions: OFF,RUNand START. Turn
the key to STARTto start the engine.
Releasethe key and
it will return to the
RUN position. Turn
the key to OFFto
stop the engine.
(Another way to
stop the engine is to
move the engine
throttle lever to the Figure 3-5
STOPposition.)
To avoid serious personal injury or
damage to equipment, do not start your
engine at this time. Complete starting
instructionsare describedin Section4,
Operation.
13