Adding Channels To The Tv's Memory; Programming Channels Automatically; Adding And Erasing Channels Manually; Changing Channels - Toshiba 27AFX54 Owner's Manual

÷
Adding channels to the TV's memory
Your TV wilI stop on specific channels that are stored in the TV's
channeI memory when you press Channel _ or V. Use the steps
below to set all active channels in your area automatically.
Programming channels automatically
"Your TV can automatically detect all active channeis and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase channels manually.
To add channels automatically:
1. Press MENU, then press _ or _ to display the SETUP menu.
2. Press A or V until the TV/CABLE
seIection is highlighted.
3. Press ,_ or _ to highlight either
TV or CABLE, depending on
which you use.
If you use an antenna, choose TM
If you use cable, choose CABLE.
CLOSEB BAPTmONOFF
TV _ABLE
CRPROGRAM START
ADD/ERASE ADD
SELECT A Y ADJUST _
4. Press V to select CH PROGRAM.
5. Press _ or _ to start channel programming. The TV will automati-
cally cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
"PROGRAMMING NOW-PLEASE WAIT" appears.
6. When channel programming is complete, the message "COMPLETED"
appears.
7. Press CH ,& or V to view the programmed channels.
Adding and erasing channels manualmy
After you have programmed the channels automatically, you can add or
erase specific channels manually.
To add or erase channems manually:
1. Select the channel you want to add or erase.
If adding channels, you must select the channel to add using the
Channel Number buttons.
2. Press MENU, then press _ or !_
to display the SETUP menu.
3. Press A or V to highlight ADD/
ERASE.
4. Press 4 or _ to select ADD or
ERASE, whichever function you
want to perform.
5. Repeat steps 1-4 for other
channels you want to add or erase.
CLBSEB CAPTION OFF
TV/CABLE CABLE
CRPROGRAM START
_:A_D!ERASE
SELECT A T ADJUST _
Changing channels
To change to the next programmed channel:
Press Channel V or _. on the TV or CH _. or V on the remote
control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100) on the remote
control.
For example, to select channel 125, press 100, 2, 5.
17
3N11601A/E P07-17
÷
1/19/04, 6:01 PM
Channel
Numbers
-- Menu
-- Exit
Channel &V