Setting The Sleep Timer; Using The Closed Caption Feature - Toshiba 27AFX54 Owner's Manual

÷
Setting the sleep timer
You can set the TV so it turns off automatically.
To set the sleep timer:
Repeatedly press SLEEP on the remote control to set the length of
time until the TV turns off. The clock wiII count down 10 minutes for
each press of the SLEEP button (120, 110, ...10, 0). After the sleep
time is programmed, the display wiII appear briefly every ten minutes
to remind you that the sleep timer is operating.
To confirm the sleep timer setting:
Press SLEEP one time. The remaining time will be momentarily
displayed.
To cancem the smeep timer:
Repeatedly press SLEEP until the display turns to 0.
Using the closed caption feature
The Closed Caption feature has two options:
Captions--An on-screen display of the dialogue, narration, and
sound effects of programs and videos that are closed-captioned
(usually identified in your Ioca! TV listing as "CC").
Text--An on-screen dispiay of information not related to the
program, such as weather or stock data (if available in your viewing
area).
To view captions or text:
1. Tune the TV to the desired program.
2. Press MENU, and then press 4 or _- to display the SETUP menu.
3. Press ,& or V to highlight CLOSED CAPTION.
_i_ilc2 T! T2
OFF
TV/CABLE CADLE
CHPROGRAM START
ADD/ERASE ADD
SELECT A T ADJUST 4
4. Press ,_ or _ to select the desired Closed Caption mode, as
follows:
, To view captions, select C1 or C2 (C1 displays translation of the
primary language in your area). Note: If the program or video
you selected is not closed-captioned, no captions will display
on-screen.
, To view text, select T1 or T2. Note: If text is not available in your
viewing area, a black rectangle may appear on-screen. If this
happens, set the Closed Caption feature to OFF.
, To turn the Closed Caption feature off, highlight OFF in the
Closed Caption menu.
Sleep
Menu/
Enter
Note:
A closed caption signal may not be decoded
in the following situations:
, when a video tape has been dubbed
, w,#en the signal reception is weak
, when the signal reception is non-standard
3O
3N11601A/E P18-30
÷
1/19/04, 6:02 PM