Table of Contents
Advertisement
REMOTE
CONTROL
OPERATION
BATTERIES
How to install batteries in the Remote Control Unit
Remove the battery cover on the
reverse side of the unit.
Install 2 batteries ("AA" size) into the
unit.
Note:
Carefully install batteries to
match the polarity diagrams.
Close the battery cover.
(REMOTE
CONTROL
OPERATION
RANGE
The Remote Control must have a clear line of sight to
the sensor on the front of the VCR. It must be within
an angle of 30 ° either side of center. The maximum
operating distance is about 16 feet.
Point the front end of the Remote Control at the VCR.
CONTROL
BUTTON
FUNCTIONS
_)
The remote control unit allows remote operation of 15 modes:
PLAYback, STILL picture, SLOW playback
(1/120
times normal speed), Frame
advance, CUE, REVIEW, Fast Forward, Rewind, PAUSE, STOP, TV/VCR, CHANNEL
up, CHANNEL down, REC, and POWER ON/OFF.
Notes:
1. Remote control cannot be operated in the following conditions:
1) In timer recording mode
2) Without a cassette in the cassette compartment
However, TV/VCR, POWER and CHANNEL up/down modes can be operated by
remote control.
2. When using remote control unit, press control buttons at intervals of about one
second to ensure correct operation.
3. If the remote control unit is not to be used for a long period of time, remove the bat-
teries to avoid possible damage from battery corrosion.
4. Keep unit away from extremely hot or humid places and avoid mechanical shock.
r
E3-CI
s'nI.L
TOSHIBA
18
Advertisement
Table of Contents
