Table of Contents
Advertisement
÷
g the clock / Setting the disc
You can manually set the date, year and present time
with the remote control.
Preparation:
• Turn ON the TV and set it to the video input mode.
. Select "Clock" from "General". For the procedure, see
steps 1 to 3 in "Using the SETUP MENU" on page 20.
Example:
Setting the clock to "10:20AM" March, 25th, 2007.
Clock
Settings
1
2
Select "Clock Settings" and press ENTER.
Press • or • to select hour, minute and AM/PM.
N_
Press • or • to set the value of the selected item.
A
Repeat steps 2 and 3 to set the hour, minute and
AM/PM.
Then press ENTER.
Date Settings
1
2
Select "Date Settings". Then press ENTER.
Press • or • to select month, date and year.
v
Press • or • to set the value of the selected item.
2 and 3
the
date and
Repeat steps
to set
month,
year.
Then press ENTER.
This section describes disc setting.
Preparation:
. Turn ON the TV and set it to the video input mode.
. Select "Disc" from "General".
For the procedure, see
steps 1 to 3 in "Using the SETUP MENU" on page 20.
You can format a recorded DVD-RAM/-RW/+RW.
Check the content of the disc before format. If you format
the disc, the recorded content of the disc will be erased.
Select "Format", then press ENTER.
In case of DVD-RW: The screen below will appear.
Press • or • to select "VR" or "Video" mode, then
press ENTER.
In case of DVD÷RW, DVD-RAM: Go to step 2.
The Disc Erase Notification will appear.
• When you select "Yes" and press ENTER, format
will start. The screen below will appear.
• When you select "No" and press ENTER, format
will be canceled.
NOTES:
. You cannot format Ver. 1.0 DVD-RW and DVD-R.
• You cannot format a disc if the disc protection is "ON".
In such a case, be sure to cancel the disc protection
(see page 25) before format.
=<
¢e
¢e
÷
23
2K70101A
E P20-28
23
_
07.1 29, 3:55 PM
Hide quick links:
Advertisement
Table of Contents
