Layout Change; Layout Change; Bring To Full Screen Mode - EverFocus ECOR Series Instruction Manual

4.5 Layout Change

4.5.1 Layout Change

The 4 CH ECOR DVR has a total of three display modes available, and the 8 CH ECOR has four. The
different available layouts are shown below:
(9 screens)
To change layout, follow the steps below:
By mouse: Right-click to bring up the menu bar and click
displays.
By front panel: Press
Notes 9 screen display is only available for 8 CH model
1
PIP display is not available in Playback mode
2

4.5.2 Bring to Full Screen Mode

By mouse: Left-click on the selected channel to put that camera in full screen mode.
By front panel: Press any channel key to bring that channel to full screen mode.
(4 screens)
key to switch between 9, 4, PIP and full displays.
(PIP)
to switch between 9, 4, PIP and full
23
(Full)