Sony Handycam HDR-XR100 Operating Manual page 40

Creating a standard
definition image
quality (SD) disc with a
recorder, etc.
(A/V connecting cable
connection)
A/V Remote
Connector
You can dub
images played
back on your
camcorder on a disc or video cassette,
by connecting your camcorder to a disc
recorder or a Sony DVD writer, etc. with
the A/V connecting cable. Connect the
device in either way of [] or []. Refer
also to the instruction manuals supplied
with the devices to be connected. Select the
recording media that contains movies you
want to dub befbre starting the operation
(p. 43).
• Connect },our camcorder to the wall outlet (wall
socket) using the AC Adaptor supplied for this
operation (p. 14).
• High definition image quality (HD) movies
will be dubbed with standard definition image
quality (SD).
[] AA/connecting cable (supplied)
Your camcorder is equipped with A/V
Remote Connector (p. 62). Connect the
A/V connecting cable to your camcorder.
[] AN connecting cable with S VIDEO (sold
separately)
When connecting to another device
via the S VIDE() jack, by using an A/V
connecting cable with an S VIDEO cable
(sold separately), higher quality images can
be produced than with an A/V connecting
cable. Connect the white and red plug
(left/right audio) and the S VIDEO plug
(S VIDE() channel) of the A/V connecting
cable with an S VIDEO cable. If you
connect the S VIDEO plug only, you will
hear no sound. The yellow plug (video)
connection is not necessar)_
Input
S VIDE()
VII)EO
(Yellow)
(White)
AUDIO
m- L®._
(Red)
(Yellow)
_:::::L: Signal flow
Insertthe recording media in the
recording device.
• If your recording device has an input
selector, set it to the input mode.
Connectyour camcorder to the
recording device (a disc recorder,
etc.) with the A/V connecting
cable [] (supplied) or an A/V
connecting cable with SVlDEO
[] (sold separately).
• Colmect your calncorder to the input jacks
of the recording device.
4;