Sony SLT-A35 Instruction Manual page 39

4
Usetheblower t ocleantheimage
sensor surface andthe
surrounding a rea.
• Do not touch the image sensor with the
tip of the blower and do not put the tip
of a blower into the cavity beyond the
nlount.
• Hold the camera's face downward to
prevent the dust from resettling in the
camera. Complete the cleaning quickly.
• Also clean the back of the mirror using
a blower.
5 Afterthecleaning isfinished,
lowerthemirrorwitha finger
untilit clicks.
• Lower the frame of the mirror back
down with a finger. Be carefid not to
touch the surface of the mirror.
• Lower the mirror clown until it locks /,
firmly.
6 Attach the lensandturnthecameraoff.
• Confirm that the mirror is locked down firmly when you attach the lens.
Roles
• After the cleaning is finished, confirm that the mirror is locked down firmly when
you attach the lens. Otherwise, the lens may be scratched or this may be the cause of
additional trouble. Also, if the mirror is not locked down firmly, the autofocus does
not work during shooting.
• You cannot shoot while the mirror is lifted up.
39