Sony SLT-A35 Instruction Manual page 28

• Do nol hold by any part nllhe lens lhal prolrudes when zooming or focusing.
Toremove the lens
1 Pressthelensreleasebutton all
theway in andturnthelens
counterclockwise untilit stops.
Lens release button
2 Attach thecapstothefrontand
rearof the lensandthe body cap
tothecamera.
• Before you attach them, remove dust
from them.
• A real"lens cap is nol supplied with the DT
18-55mm F3.5-5.6 SAM Lens Kil. When
ynu store lhe lens withnut anaching it lo
the camera, purchase the Rear Lens Cap
ALC-R55.
To attach a lens hood
It is recommended that you use a lens
hood to reduce flare and ensure
maximum image quality.
Fit the hood into the mount on the end of
the lens barrel and rotate the hood
clockwise until it clicks.
• A lens hood is not included with the DT 18-55mm F3.5-5.6 SAM. You
can use the ALC-SHI08 (sold separately).
• When using a built-in camera flash, make sure to remove the lens hood to
avoid blockage of the flash light.
• When storing, turn over the lens hood and place it onto the lens
backwards.
28