Jacksto connectexternaldevices
E_+_open
the shoe cover.
[_[_E_...open
the jack cover.
[] Active Interface Shoe ,_c_sho+
The Active Interface Shoe supplies power
to optional accessories such as a video
light, a flash, or a microphone. The
accessory can be turned on or ofl as you
operate the POWER switch on your
camcorder. Refer also to the instruction
manual supplied with your accessory for
details.
• Tl_eActive Interlace Sl/oehasa sati:ty dcxice
Ibr Iixingthe installed accessory securely. To
connecl
an
accessory,
press
down and
push
it
to the end, and then tiglaen the screw. To
relllove
an
accessoly,
looscll
tile
screw,
and
then
press
down
and pull out the accessory.
•Whcn
you are recording
with the extcrnal
flash/optional),
turn off the power
of tile
cxternal
flash to prevent
charging
noise
being
recorded.
• You cannot use an external flash (optional)
and the built-in flash at the same time.
•Whcn an external microphone (optional) is
connectcd, it takes precedence over file
internal microphone (p.44).
[] Shoe cover
[] REMOTE jack
• Collllect
other
optional
accessories.
[] A/V (audio/video)jack
(p.52, 92, 94)
[] DC IN jack (p.21)
[] v_(USB)jack
(p.96. 99)
98